Turnkey balcony - all types of work on the balcony

"Loggia"

A loggia is a type of balcony that has two walls up to the ceiling on both sides, along the front part there is a parapet (fencing) and a light opening for glazing, which is called “Loggia”. For glazing the loggia, a metal-plastic structure of the required configuration and additional materials are used, such as a canopy installed above the MPC (metal-plastic structure), ebb in the lower part of the MPC, a strip to hide the foam on the sides from the street, a window sill indoors. If the loggia is sheathed from the inside, an expansion profile is used to increase the distance occupied by the sheathing. https://euro-wikna.kiev.ua/

By contacting the specialists of our company TM “EuroWikna - Evrovikna” you will receive constructive advice and answers to your questions

"L-shaped balcony"

L-shaped balcony - this type of balcony has only one side wall to the ceiling, on one side. The front and second side parts are glazed using MPC structures, connected to each other at right angles, with a special corner connector, and a canopy is installed above the structure, a drip lining is mounted at the bottom of the structure, strips of the required configuration to hide the foam on the sides from the street side and a window sill inside the balcony. If the balcony will be sheathed from the inside, an expansion profile is used to increase the space for the sheathing.

By contacting the specialists of our company TM “EuroWikna” you will receive constructive advice and answers to your questions

https://euro-wikna.kiev.ua/

"U-shaped balcony"

U-shaped balcony - a good example of such balconies are balconies in houses of the Khrushchev or Stalin type. The glazing of such balconies is carried out along the entire perimeter, connecting the front part with the side parts at a right angle of 90*degrees, using special connectors. Additional materials are also used: a canopy, ebb to drain water during precipitation, strips that cover the visible part of the foam seam and prevent its destruction from exposure to weather conditions, a window sill inside the balcony. If necessary, expansion (additional profile) profiles are used in the case of cladding the balcony inside.

By contacting the specialists of our company TM “EuroWikna - Evrovikna” you will receive constructive advice and answers to your questions

"Bay Window Balcony"

Balconies of the “Bay window” type are a balcony, the glazed parts of which are connected to each other by a bay window connector, or as it is also called a “bay window pipe”, which allows you to connect the balcony structures at any angle. Additional materials such as a canopy, a flashing that serves to drain water when it rains, a flashing is attached so as to close the foam seam from the influence of weather conditions on it, and to give an aesthetic appearance to the window sill inside the balcony.

By contacting the specialists of our company TM “EuroWikna - Evrovikna” you will receive constructive advice and answers to your questions.

https://euro-wikna.kiev.ua/

"French Balcony"

French-type balcony - involves glazing a balcony from floor to ceiling; such glazing can be used on almost any balcony, be it a loggia, L-shaped or U-shaped balconies, even on a bay window, having previously prepared the balcony for glazing of this type. To glaze a balcony using the “French” type, connectors, canopies, ebbs, and trims are used according to the configuration and type of balcony.

By contacting the specialists of our company TM “EuroWikna- Evrovikna” you will receive constructive advice and answers to your questions.

https://euro-wikna.kiev.ua/